Note: I
am not a
commercial dealer. The items below were mostly acquired as part
of auction lots etc. and are surplus to my requirements.
* click on images for larger views *
Contact:
wefalck at wefalck dot eu
Books
HÜLLE, F.W. (1926): Die Grundzüge der
Werkzeugmaschinen und der Metallbearbeitung, Bd. 2, Die wirtschaftliche
Ausnutzung
der Werkzeugmaschinenen.- 309 S., Berlin (Verlag von Julius
Springer).
EUR 18
GERCKE, H. (1898): Die
Torpedowaffe, ihre Geschichte, Eigenart, Verwendung und Abwehr. Mit
einem Anhange: Über den Untergang des Panzerschiffs ‚Maine’ der
Flotte der Vereinigten Staaten von Amerika.- VI,115 S. mit 48 teils
ganzs. Abbildungen (Fotos), sowie Konstruktionszeichn. u.
Schiffsrissen, Berlin (E.S. Mittler u. Sohn).
EUR 21
WIECHERS, K.-H. (1984): ...
und fuhren weit übers Meer. Zur Geschichte der ostfriesischen
Segelshiffahrt, Bd. I: Inseln und Küste.- 392 S., Norden (Verlag
Soltau-Kurier).
EUR 30
Machinery
and Tools
Picture
Description
Price
WW Lathes
Simple tailstock for WW lathe. Note: part of
locking ring broken off.
EUR 50
Boley (?) collet-holding tailstock (8 mm
collets)
EUR 180
Set of 15 unusual, long (43, 5 mm to taper,
total length 51 - 52 mm) collets.
Other dimensions as for the common 8 mm watchmaker‘s lathe
collets.
Nos. 12,20,22,25,26,35,38,40,45,47,53,54,60,66,70
EUR 90
6 mm Lathes
Boxed 6 mm lathe
Lorch, Schmidt & Co.
3-jaw chuck is marked
Wolf, Jahn & Co.
EUR 450
Other tools
Set of 3 toolmaker's milling
cutters with 6 mm shaft (some are marked HSS)
EUR 6
Set of 6 toolmaker's milling cutters with 6 mm
shaft (some are marked HSS)
EUR 12
Set of 4 toolmaker's milling cutters with 6 mm
shaft (some are marked HSS)
EUR 8
Set of 7 toolmaker's milling cutters with 6 mm
shaft (some are marked HSS)
EUR 14
Set of 4 toolmaker's milling cutters with 6 mm
shaft (some are marked HSS)
EUR 8
Set of 6 toolmaker's milling cutters with 6 mm
shaft (some are marked HSS)
EUR 12
Set of 3 toolmaker's milling cutters with 6 mm
shaft (some are marked HSS)
